5kWh Stackable Home Battery | Expandable LiFePO4 Solar Storage Module
video
5kWh Stackable Home Battery | Expandable LiFePO4 Solar Storage Module

5kWh Stackable Home Battery | Expandable LiFePO4 Solar Storage Module

The 5 kWh Stackable Home Battery is a modular LiFePO₄ storage unit for residential solar-plus-storage, backup, and off-grid applications. It supports energy independence, peak shaving, and uninterrupted power through integration with single- and three-phase hybrid inverters.

Introduction

 

The 5 kWh Stackable Home Battery is a modular LiFePO₄ storage unit for residential solar-plus-storage, backup, and off-grid applications. It supports energy independence, peak shaving, and uninterrupted power through integration with single- and three-phase hybrid inverters.

 

Product Specifications

 

Parameter

Specification

Nominal Energy

5.12 kWh

Nominal Voltage

51.2 V

Rated Capacity

100 Ah

Operating Voltage Range

43.2–57.6 V

Standard Charge Current

50 A (0.5C)

Max. Continuous Charge Current

100 A

Max. Continuous Discharge Current

100 A

Theoretical DC Output

5.12 kW at nominal voltage

Cycle Life

≥6,000 cycles (80% DoD, 25°C, 0.5C, 70% EOL)

Cooling Method

Natural convection

Enclosure Flame Rating

UL94 V-0

Communication

CAN / RS485

Installation

Vertical Stack / Floor Standing

 

Hybrid Inverter Compatibility

 

Hardware Interfaces: Physical CAN 2.0B and RS485 communication ports for inverter interfacing.

Protocol Support: Protocol interfaces configured for integration with Deye, GoodWe, Growatt, Victron, Sofar, LuxPower, Solis, and SMA hybrid inverters.

Baud Rate Configuration: Supports 250kbps and 500kbps CAN bus speeds, configured via physical DIP switches or software settings depending on inverter requirements.

 

Expandable Battery Capacity

 

Modular Capacity Scaling: Configurable from a single 5.12kWh module up to 10 parallel units, enabling total system expansion up to 51.2kWh.

Capacity Increments: 5.12kWh → 10.24kWh → 15.36kWh → 20.48kWh → up to 51.2kWh maximum system limit.

Mechanical Stacking Alignment: Integrated dovetail joint interlocking design aligns modules during vertical stack positioning.

Parallel Integration: Parallel expansion requires identical capacity ratings, matching battery chemistry, and compatible firmware; mixing old and new units is restricted per installation manual guidelines.

 

product-800-800

 

Charge & Discharge Performance

 

Continuous Current Limit: Supports up to 100A continuous discharge current.

Low-Temperature Charge Protection: BMS restricts charging current when internal cell temperatures fall below 0°C to reduce lithium plating risks.

High-Temperature Rate Adjustment: BMS throttles charge and discharge limits when internal cell temperature thresholds are reached.

Current Distribution in Parallel: Connecting modules in parallel divides total system current across packs, maintaining 51.2V nominal voltage while increasing available system current capacity.

 

Battery Safety & Protection

 

Cell Structure: Built with industrial prismatic LiFePO4 cells to maintain structural stability under thermal cycling.

Short-Circuit Protection: Electronic BMS disconnect supported by internal hardware fuse protection.

Thermal Monitoring: Multi-point cell sensors trigger BMS fault alerts and circuit isolation if operating thermal limits are exceeded.

Internal Wiring Safety: Busbars insulated with silicone sleeving reduce risks of physical short circuits during assembly or transport.

 

Warranty

 

Warranty Terms: 5-year standard product warranty covering manufacturing defects and internal BMS failures when operated per user manual guidelines.

Warranty Validation Conditions: Coverage requires operating within designated current limits, temperature windows, and verified inverter protocol settings.

RMA Processing: Technical review of BMS log data and error records is performed prior to replacement component authorization.

 

Engineering Support

 

Technical Documents Available for Download: Product Datasheet, Installation Manual, Technical Drawings, Wiring Diagram, and Warranty Terms.

Pre-Sales Support: Protocol compatibility checks, system sizing, and custom wiring confirmation.

System Design Workflow: Submit project requirements → Confirm inverter model & protocol → Verify stack module count → Receive complete wiring and layout diagram.

 

2026060166

 

Certifications & Compliance

 

Transport & Safety Standards: Transport test summary compliant with UN38.3 standards; marked for CE and RoHS compliance.

Documentation Verification: UN38.3 test summaries, CE declarations, and MSDS documentation are available upon request.

Manufacturing Facility Qualification: Production facilities operate under ISO 9001 Quality Management and ISO 14001 Environmental Management Systems.

 

FAQ

 

Q: Is continuous 100 A discharge covered?

A: Yes, but the 6,000-cycle rating is validated at 0.5C. Continuous 1C use may reduce service life.

Q: Must parallel units use identical firmware?

A: Yes. Firmware must match exactly before each expansion or commissioning.

Q: How many units can be physically stacked?

A: The 10-unit electrical limit applies, but the maximum physical stack height is installation-dependent. Confirm full-stack layouts in advance.

Q: What does UL94 V-0 certify?

A: Only the enclosure material's flammability-not system-level thermal-runaway safety such as UL 9540A.

Q: Can the CAN baud rate be configured on-site?

A: Yes. A DIP switch supports field configuration, allowing regional stock pooling.

Q: Is abnormal module degradation covered?

A: Yes, if BMS logs prove one unit degraded unusually faster than its stack-mates. Enable SOH logging at commissioning.

Q: Do unlisted inverters affect the warranty?

A: Possibly. Obtain written approval before using an unlisted inverter brand.

Q: What are the lead times?

A: Small orders typically ship from stock within days. Large orders may require advance forecasts due to BMS component lead times.

Hot Tags: 5kwh stackable home battery | expandable lifepo4 solar storage module, China 5kwh stackable home battery | expandable lifepo4 solar storage module manufacturers, suppliers, factory

Send Inquiry