Household Energy Storage Batteries for Solar and Backup Power
Household energy storage batteries store electricity from solar PV systems or the grid for later residential use. They are used for solar self-consumption, peak-load management, and backup power during grid outages.
Household Energy Storage Battery Types
Wall-Mounted Home Batteries
Wall-mounted batteries are designed for garages, utility rooms, and other suitable installation areas. Their vertical installation reduces floor-space requirements. Outdoor installation depends on the product's IP rating and local installation requirements.
Stackable Home Batteries
Stackable batteries use vertically arranged modules to expand system capacity. Depending on the model, modules can be added to increase usable energy without requiring a separate battery rack.
All-in-One Home Energy Storage Systems
Integrated systems combining the battery, hybrid inverter, and MPPT solar charge controller in one factory-wired cabinet. They simplify installation, reduce wiring time, and streamline site integration.
Modular Home Battery Systems
Modular battery systems use multiple battery units to increase total storage capacity. The available parallel configuration and maximum battery quantity depend on the battery model and BMS architecture.
Home Battery Capacity & Voltage Options
|
Household Requirement |
Typical Capacity |
Configuration |
Typical Application |
|
Essential Backup |
5 kWh class |
Single battery |
Refrigerator, lighting, Wi-Fi |
|
Daily Solar Storage |
10 kWh class |
Single or modular battery |
Solar self-consumption |
|
Larger Energy Demand |
15 kWh+ class |
Modular system |
Extended backup and larger household loads |
|
Whole-Home Backup |
Project-specific |
Multi-battery system |
Longer backup duration and higher energy demand |
Battery capacity should be selected together with continuous discharge power, inverter output, backup load, and required runtime.
LiFePO4 Battery Technology
LFP Chemistry
Lithium iron phosphate (LiFePO4) cells provide a stable chemistry widely used in stationary energy storage applications.
Extended Service Life
LFP chemistry delivers stable capacity retention over thousands of deep charge and discharge cycles under daily residential operating profiles.
High Usable Energy
Residential LFP systems can be configured for high usable energy through appropriate DoD limits defined by the battery manufacturer and system operating conditions.
Communication Interfaces: CAN 2.0B and RS485/RS232, depending on model.
Communication: CAN and RS485/RS232 interfaces are available on applicable models for BMS-inverter communication and system monitoring.
Compatible Inverter Brands
Voltix residential battery systems support protocol integration for mainstream global hybrid inverter platforms, including:
Deye
Growatt
GoodWe
Victron Energy
Solis
Luxpower
Voltronic Power
Sofar Solar

Expandable Energy Storage
Parallel Expansion
Multiple battery units can be connected in parallel on supported models. Maximum parallel quantity and connection method depend on the battery model and BMS architecture.
Master-Slave Architecture
A master-slave BMS architecture can coordinate multiple battery modules and provide aggregated battery status to the inverter. Address configuration and maximum module quantity depend on the specific system design.
Phased Capacity Expansion
System design supports adding additional capacity modules to existing installations as household demand increases over time.
Battery Safety & BMS Protection
Cell Voltage Monitoring
Overcharge cutoff protection prevents cell degradation; over-discharge protection prevents deep cell depletion.
01
Multi-Level Protection
Multi-level overcurrent and short-circuit protection limits transient electrical surges and isolates system shorts.
02
Thermal Management
Integrated temperature sensors constantly monitor cell terminals and power circuitry, pausing charging or discharging if temperatures move outside safe ranges.
03
Cell Balancing
Integrated passive cell balancing levels voltage variances between individual cells during top-of-charge phases to maintain capacity alignment.
04
SOC & SOH Monitoring
The BMS estimates state of charge (SOC) and state of health (SOH) using battery operating data.
05

Manufacturing Infrastructure: Operates specialized production space housing automated assembly lines, laser welding cells, and dedicated battery cycle-testing stations.
Annual Output Capacity: Production capability supporting up to 1 GWh of total battery storage capacity annually. Capacity figures refer to the manufacturer's annual production capacity under specified production conditions.
R&D Team: 30+ engineers covering battery module design, BMS development, firmware, and inverter communication integration.
Quality Control & Traceability: Implements full cell batch traceability, production batch recording, BMS firmware tracking, final electrical test records, and serial number tracking across all units. Production inspection includes cell incoming inspection, assembly checks, electrical testing, and final product inspection.
OEM / ODM Capabilities: Supports private labeling, enclosure customization, packaging, battery configuration, and selected BMS communication adaptations based on project requirements.
CE and RoHS Documentation
Available for applicable product models and target commercial markets.
IEC 62619
IEC 62619 test reports or compliance documentation are available for applicable battery models.
UN38.3 Transport Testing
Lithium battery transport safety testing has passed verification for sea and air freight shipping.
ISO Management Systems
Manufactured under ISO 9001 quality management and ISO 14001 environmental management systems at the production facility.
SDS / MSDS Files
Material Safety Data Sheets are available for regulatory compliance and international shipping requirements.
Technical Documents
The following documents can be provided for applicable models upon request:
- Product Datasheet
- User Manual
- CE Documentation
- IEC 62619 Test Report
- UN 38.3 Test Report
- SDS / MSDS
- Warranty Terms
- Inverter Compatibility List
FAQ
As one of the most professional household energy storage battery manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please rest assured to wholesale advanced household energy storage battery at competitive price from our factory.









