Residential Solar Panels for Rooftop Solar Projects
Residential solar panels convert sunlight into DC electricity for grid-connected, hybrid, and battery-backed home energy systems. Voltix offers N-type TOPCon, HJT, and PERC modules in different power, size, efficiency, and glass configurations for residential rooftop projects.
Panel Types
N-type TOPCon Solar Panels
Available in monofacial and bifacial configurations, with model-specific efficiency, power temperature coefficient, and electrical specifications for residential rooftop systems.
01
Heterojunction (HJT) Solar Panels
Combine crystalline silicon wafers with thin-film silicon layers. Model selection can be based on efficiency, temperature coefficient, bifaciality, power output, and roof area.
02
Monocrystalline PERC Solar Panels
P-type modules available for projects where module efficiency, power output, and overall system cost are balanced against project requirements.
03
Full Black Solar Panels
Available with black frames and dark module surfaces for residential projects with specific appearance requirements. Available configurations should be confirmed by model.
04
Bifacial Dual-Glass Solar Panels
Use glass on both sides of the module to receive front- and rear-side irradiance. Bifacial energy gain depends on mounting height, rear-side exposure, surface reflectance, and site conditions.
05
Model Comparison
|
Model Series |
Power |
Efficiency |
Cell Technology |
Dimensions |
Weight |
Configuration |
Bifaciality |
|
Voltix TOPCon 440–460W |
440–460W |
22.0–23.0% |
N-type TOPCon |
1762 × 1134 × 30 mm |
21.5 kg |
Monofacial / Single-Glass |
— |
|
Voltix TOPCon 570–590W |
570–590W |
22.1–22.8% |
N-type TOPCon |
2278 × 1134 × 35 mm |
28.0 kg |
Bifacial / Dual-Glass |
80% ±5% |
|
Voltix HJT 690–710W |
690–710W |
22.2–22.8% |
N-type HJT |
2384 × 1303 × 33 mm |
32.5 kg |
Bifacial / Dual-Glass |
85% ±5% |
|
Voltix PERC 440–450W |
440–450W |
20.2–20.7% |
P-type PERC |
1980 × 1000 × 35 mm |
23.5 kg |
Monofacial / Single-Glass |
— |
Residential roof suitability: Module dimensions, weight, and electrical characteristics should be checked against available roof area, structural load limits, installation access, and inverter input requirements before model selection.
Panel Size & Roof Compatibility
Module Dimensions: Current residential models range from 1,762–2,384 mm in length and 1,000–1,303 mm in width. Confirm the exact module dimensions and installation clearances from the selected model datasheet.
Roof Load: Module weight ranges from 21.5–32.5 kg. Roof assessment should include module weight, mounting hardware, wind and snow loads, and local structural requirements.
Mechanical Load: Selected models are rated up to 5,400 Pa front load and 2,400 Pa rear load. Actual allowable loads depend on the model, mounting method, clamp position, and installation conditions.
Mounting Compatibility: Frame design, mounting holes, grounding points, and approved clamping zones vary by model. Confirm rail, clamp, and grounding compatibility against the selected module's installation manual.
System Voltage: Maximum system voltage varies by model and must be matched with the inverter's DC input voltage and system design requirements.
Electrical Compatibility: Check maximum system voltage, operating voltage range, Voc, Isc, Vmp, and Imp against the inverter's MPPT and maximum DC input specifications.
Voc: Maximum open-circuit voltage for string voltage calculations.
Vmp: Operating voltage used for MPPT compatibility.
Isc: Short-circuit current for system and protection design.
Imp: Operating current for inverter input compatibility.
Maximum System Voltage: Must comply with the module, inverter, and system design limits.
Temperature Coefficient: Used to evaluate voltage changes under high and low cell temperatures.
Verify the final string configuration using the selected module datasheet, inverter specifications, site temperature range, and local electrical requirements.

OEM & Customization Capabilities
Custom Dimensions & Frame Profiles
Frame dimensions, depths, and anodized aluminum finishes (black or silver) can be developed.
Junction Box & Cable Assemblies
Junction box configurations, custom cable lengths, and connector options can be specified according to system wiring requirements and applicable compatibility standards.
Private Labeling & Serial Packaging
Customer branding on backsheets, custom frame logo placement, and tailored packaging carton designs with integrated serial number barcoding are available.
BOM Options
Encapsulant, backsheet, glass, junction box, and other module components can be evaluated for OEM projects, subject to product validation, certification, and production requirements.
Product Warranty & Linear Power Warranty
|
Series |
Product Warranty |
Year 1 Output |
Annual Degradation |
Guaranteed Output |
|
Voltix TOPCon |
15 years |
≥99.0% |
≤0.40%/year |
≥87.4% at Year 30 |
|
Voltix HJT |
15 years |
≥99.0% |
≤0.30%/year |
≥90.3% at Year 30 |
|
Voltix PERC |
12 years |
≥98.0% |
≤0.55%/year |
≥84.8% at Year 25 |
Warranty Coverage: Warranty coverage is subject to the official product warranty terms, installation requirements, operating conditions, and claim procedures.
Verification & Claims: Official warranty terms, degradation curves, and claim submission guidelines are available upon request.
Technical Documents
Installation Manuals
Structural mounting guidelines, torque specifications, clamping zones, and grounding rules are available upon request.
Mechanical CAD Drawings
2D dimensional drawings and 3D CAD files for system layout planning are available upon request.
Compliance & Warranties
Certificates (IEC/UL/CE) and official warranty policy documents available upon request.
FAQ
As one of the most professional residential solar panel manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please rest assured to wholesale advanced residential solar panel at competitive price from our factory.






