Introduction
Trina Solar Vertex N 720W Solar Module is an ultra-high-power N-type i-TOPCon bifacial dual-glass photovoltaic module engineered specifically for utility-scale ground-mounted solar power plants and large-scale commercial installations, optimizing power density and total energy yield for utility-scale energy projects globally.
Product Specifications
|
Specification |
Key Details |
|
Rated Power |
720 W (STC) / 551 W (NOCT) |
|
Module Efficiency |
23.2% |
|
Cell Technology |
N-type i-TOPCon, 210 mm, 132 half-cut cells |
|
Bifaciality |
80 ± 5% |
|
Electrical Parameters |
Vmp 40.7 V / Imp 17.69 A / Voc 49.3 V / Isc 18.57 A |
|
System Voltage |
1500 V DC max. / 35 A max. series fuse |
|
Temperature Coefficients |
Pmax −0.29%/°C / Voc −0.24%/°C / Isc +0.04%/°C |
|
Dimensions & Weight |
2384 × 1303 × 33 mm / 38.3 kg |
|
Construction |
Dual 2.0 mm heat-strengthened glass / anodized aluminum frame |
|
Junction Box |
IP68, 3 bypass diodes |
|
Connectors |
TS4 / TS4 Plus / MC4 compatible |
|
Mechanical Load |
Front 3600 Pa / Rear 1600 Pa design load |
|
Operating Temperature |
−40°C to +85°C |
Environmental Resistance
Environmental Resistance: Tested to IEC 61701 for salt-mist corrosion, IEC 62716 for ammonia resistance, and IEC 60068-2-68 for sand and dust, supporting coastal, agricultural and desert sites, subject to project verification.
PID Resistance: N-type cell architecture mitigates Potential Induced Degradation under high-voltage stress.
LID / LeTID Mitigation: N-type silicon has no boron-oxygen LID; first-year degradation is guaranteed ≤1.0%.
Dual-Glass Protection: The heat-strengthened dual-glass structure resists moisture ingress, UV degradation, and mechanical-stress-induced microcracking.
Structural System Compatibility
Low-Voltage High-Current Design: Enables longer strings, depending on the inverter's DC input parameters and site temperature, thereby reducing the need for string combiner boxes and cabling.
Inverter System Integration: Designed to match utility-scale central inverters and string inverters supporting high input current per MPPT.
Tracker System Adaptability: Suitable for 1P and 2P single-axis horizontal tracking systems; mounting configuration can be adjusted according to structural design loads.
Clamping & Mounting Flexibility: Pre-drilled mounting holes on the frame allow variable clamping and bolting options to comply with site-specific wind and snow load criteria.
OEM Services
Custom Brand & Logo Application: OEM rear-glass or label printing, custom frame laser engraving, and branded corner protectors available based on project volume.
Cable & Connector Customization: Factory-installed extended cable lengths and specified connector brands (e.g., standard MC4, MC4-Evo 2) available upon request for specialized tracker designs.
Custom Packaging & Labeling: Outer carton branding, custom pallet barcoding, serial number sequences, and project-specific shipping marks tailored to destination site requirements.
Custom Electrical Sorting: Narrow flash-test sorting tolerances (e.g., current/voltage binning) available.
Degradation
First-Year Degradation: Maximum 1.0% power output reduction in year 1.
Annual Linear Degradation: Maximum 0.40% annual power output reduction from Year 2 through Year 30.
Guaranteed Output at Year 30: Minimum 87.4% of rated initial power output.
Packaging
Packaging Configuration: 33 modules per box/pallet.
40ft HQ Container Capacity: 18 boxes / 594 modules total.
Gross Weight: Approximately 1310 kg per pallet.
Transport Protection: Vertical framed packaging designed to minimize micro-cracking and deformation during sea and road transit.
Site Offloading Requirements: Requires flat ground, a minimum 2.5-ton capacity forklift, or crane equipment equipped with spreader bars.
FAQ
Q: Which certifications does the model hold?
A: It is certified to IEC 61215:2021 and IEC 61730-1/-2 by TÜV Rheinland, with CE, RoHS, REACH, and ISO 9001/14001/45001 compliance. UL 61730 is available for North American projects.
Q: Where are the modules made?
A: The contract identifies the factory in China, Thailand, or Vietnam. The origin appears on the certificate of origin, packing list, and rear label.
Q: What are the pricing and payment terms?
A: Prices are quoted per Wp on FOB Shanghai or Ningbo; CIF and DAP are available. Quotes are valid for seven days. Payment is 30% deposit and 70% before shipment, or irrevocable L/C at sight for orders above US$100,000.
Q: What are the MOQ, container capacity, and lead time?
A: The MOQ is one 40HQ container holding 594 modules, approximately 428 kW at 720 W, with a gross weight of about 23.6 tonnes. Stock ships within 7–10 days; project orders require 25–35 days. Orders above 10 containers ship in 7–10-day batches.
Q: What mounting information is provided?
A: Clamp the long sides within the marked 400–600 mm zones, torque M8 bolts to 16–20 N·m, and maintain at least 10 mm overlap.
Q: How are damage claims handled?
A: Claims for breakage above 0.3% require unloading photos and serial numbers within 15 days and are settled by replacement or credit note.
Hot Tags: trina solar vertex n 720w ultra-high power n-type i-topcon solar module, China trina solar vertex n 720w ultra-high power n-type i-topcon solar module manufacturers, suppliers, factory



